Sensor (Tray 1 Pass-Through) Static Jam Service Check - Lexmark M52 Series Service Manual

Action
Step 6
Replace the affected sheets.
Does the problem remain?
Step 7
a
Remove the left cover. See
409.
b
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Motor tests
c
Select the motor (Pick (tray 1)), and then touch Start.
Does the motor run?
Step 8
a
Remove the right cover. See
page 420.
b
Reseat the motor cable J73 on the controller board.
c
Reseat the paper feeder cable.
d
Restart the printer.
Does the problem remain?
Step 9
Replace the paper feeder. See
page 417.
Does the problem remain?
Step 10
Restart the printer.
Does the problem remain?
Sensor (tray 1 pass‑through) static jam service check
Action
Step 1
Check the paper path for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 2
Remove the paper fragments and partially fed paper.
Does the problem remain?
"Left cover removal" on page
"Right cover removal" on
"Paper feeder removal" on
Diagnostics and troubleshooting
124
Yes No
Go to step 7. The problem is
solved.
Go to step 10. Go to step 8.
Go to step 9. The problem is
solved.
Go to step 10. The problem is
solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
4064