Clipped Pages Or Images Check - Lexmark M52 Series Service Manual

Actions
Step 3
a
From the control panel, navigate to:
Print > Quality > Pixel Boost > Fonts
b
From the Quality menu, select Toner Darkness, and then adjust
the setting to 7.
c
Submit the changes.
Note: Adjusting the Toner Darkness setting to 7 results in a
slightly lighter print. You may leave the Toner Darkness value at 8
in order to maintain the darkness that you have grown
accustomed to, but this will result in reduced toner yield.
Does the problem remain?

Clipped pages or images check

Note: Before performing this print quality check, go to the control panel home screen and navigate to
Settings > Troubleshooting > Print Quality Test Pages, and then perform the initial print quality check. See
"Initial print quality check" on page
Actions
Step 1
Check if the printer is using a genuine and supported Lexmark
toner cartridge.
Note: If the printer is using a third‑party cartridge, then refer the
users to their cartridge supplier.
Is the printer using a genuine and supported toner cartridge?
Step 2
Install a genuine and supported toner cartridge.
Does the problem remain?
Step 3
Remove, and then reinstall the imaging unit.
Does the problem remain?
44.
Diagnostics and troubleshooting
72
Yes No
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.
4064