Sensor (Tray 1 Pass-Through) Late-Arriving Jam Service Check - Lexmark M52 Series Service Manual

Action
Step 3
a
Remove the duplex/MPF tray. See
on page 434.
b
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Sensor tests
c
Find the sensor (Tray 1 pass-through).
Does the sensor status change while toggling the sensor?
Step 4
a
Remove the right cover. See
page 420.
b
Check the sensor cable J73 on the controller board for proper
connection.
Is the cable properly connected?
Step 5
Reseat the cable.
Does the problem remain?
Step 6
Replace the sensor. See
on page 468.
Does the problem remain?
Step 7
Perform a print test.
Does the problem remain?
Sensor (tray 1 pass‑through) late-arriving jam service check
Action
Step 1
Check the paper path and trays for paper fragments and partially
fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 2
Remove the paper fragments and partially fed paper.
Does the problem remain?
"Duplex/MPF tray removal"
"Right cover removal" on
"Sensor (tray 1 pass‑through) removal"
Diagnostics and troubleshooting
Yes
Go to step 7.
Go to step 6.
Go to step 6.
Go to step 7.
Contact the next
level of support.
Yes
Go to step 3.
Go to step 3.
125
4064
No
Go to step 4.
Go to step 5.
The problem is
solved.
The problem is
solved.
The problem is
solved.
No
Go to step 2.
The problem is
solved.