Sensor (Tray 4 Pass-Through) Late-Arriving Or Late-Leaving Jam Service Check - Lexmark M52 Series Service Manual

Action
Step 20
Check if the source tray paper feeder and its actuators are
functional, properly installed, and free of damage.
Are the paper feeder and its components functional, properly
installed, and free of damage?
Step 21
Reinstall or replace the paper feeder. See
tray paper feeder removal" on page
Does the problem remain?
Step 22
Make sure that the source tray controller board is properly
installed. Reseat all the cables on the controller board.
Does the problem remain?
Step 23
Check the source tray controller board and its connector pins for
damage.
Are the tray controller board and its connectors free of damage?
Step 24
Replace the source tray controller board. See
sheet tray controller board removal" on page
Does the problem remain?
Sensor (tray 4 pass‑through) late‑arriving or late-leaving jam service check
Action
Step 1
Check the paper path and trays for paper fragments and partially
fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 2
Remove the paper fragments and partially fed paper.
Does the problem remain?
Step 3
Make sure that all the trays and tray inserts are properly installed.
Does the problem remain?
"250‑ and 550-sheet
504.
"250‑ and 550-
506.
Diagnostics and troubleshooting
177
Yes No
Go to step 22. Go to step 21.
Go to step 22. The problem is
solved.
Go to step 23. The problem is
solved.
Contact the next Go to step 24.
level of support.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.
4064