Sensor (Narrow Media) Late-Arriving Jam Service Check - Lexmark M52 Series Service Manual

Action
Step 7
Perform a print test.
Does the problem remain?

Sensor (narrow media) late-arriving jam service check

Action
Step 1
Check the fuser for damage and life expiration.
Is the fuser damaged or has it reached end of life?
Step 2
Replace the fuser. See
Does the problem remain?
Step 3
Remove obstructions from the fuser.
Does the problem remain?
Step 4
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Sensor tests
b
Find the sensor (Narrow media).
Does the sensor status change while toggling the sensor?
Step 5
a
Remove the right cover. See
page 420.
b
Check the cable J60 on the controller board for proper
connection.
Is the cable properly connected?
Step 6
Reseat the cable, and then perform a print test.
Does the problem remain?
Step 7
Replace the fuser. See
Does the problem remain?
"Fuser removal" on page
"Right cover removal" on
"Fuser removal" on page
Diagnostics and troubleshooting
Yes
Contact the next
level of support.
Yes
Go to step 2.
Go to step 3.
452.
Go to step 4.
Go to step 8.
Go to step 8.
Go to step 7.
Go to step 8.
452.
103
4064
No
The problem is
solved.
No
Go to step 3.
The problem is
solved.
The problem is
solved.
Go to step 5.
Go to step 6.
The problem is
solved.
The problem is
solved.