Output Expander Diverter Drive Jam Service Check - Lexmark M52 Series Service Manual

Error Description
code
407.23 Paper going to bin 2 did not reach the
sensor (OE pass‑through) on time.
407.25 Paper going to bin 2 did not clear the
sensor (OE pass‑through) on time.
407.33 Paper going to bin 3 did not reach the
sensor (OE pass‑through) on time.
407.35 Paper going to bin 3 did not clear the
sensor (OE pass‑through) on time.
407.43 Paper going to bin 4 did not reach the
sensor (OE pass‑through) on time.
407.45 Paper going to bin 4 did not clear the
sensor (OE pass‑through) on time.

Output expander diverter drive jam service check

Action
Step 1
Make sure that all the optional bins are properly installed.
Does the problem remain?
Step 2
Open all optional bin doors, and then check the paper path and
bins for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 3
Remove the paper fragments and partially fed paper.
Does the problem remain?
Step 4
Clear the optional bin paper path rollers of any dirt and
contamination.
Does the problem remain?
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Output bin quick feed > Feed to all bins
b
Touch Single or Continuous.
Does the problem remain?
Action
See "Sensor (OE pass‑through) late-arriving jam service
check" on page
See "Sensor (OE pass‑through) late-leaving jam service
check" on page
See "Sensor (OE pass‑through) late-arriving jam service
check" on page
See "Sensor (OE pass‑through) late-leaving jam service
check" on page
See "Sensor (OE pass‑through) late-arriving jam service
check" on page
See "Sensor (OE pass‑through) late-leaving jam service
check" on page
Diagnostics and troubleshooting
187
189.
191.
189.
191.
189.
191.
Yes No
Go to step 2. The problem is
solved.
Go to step 4. Go to step 3.
Go to step 4. The problem is
solved.
Go to step 5. The problem is
solved.
Go to step 6. The problem is
solved.
4064