Streaked Vertical Lines Appear On Prints Check - Lexmark M52 Series Service Manual

Actions
Step 11
Check if the printer supports the paper loaded.
Note: For a complete list of supported paper, see the printer
User's Guide.
Is the paper supported?
Step 12
Remove the paper, and then load a supported one.
Does the problem remain?
Step 13
Check the MPF pick roller for excess wear and contamination.
Is the MPF pick roller free from excess wear and contamination?
Step 14
Replace the MPF pick roller. See
page 442.
Does the problem remain?
Step 15
Perform the paper skew adjustment. See
page 401.
Does the problem remain?

Streaked vertical lines appear on prints check

Note: Before performing this print quality check, go to the control panel home screen and navigate to
Settings > Troubleshooting > Print Quality Test Pages, and then perform the initial print quality check. See
"Initial print quality check" on page
Note: This check applies only to printer models with a hot roll fuser.
"MPF pick roller removal" on
"Adjustments" on
44.
Diagnostics and troubleshooting
62
Yes No
Go to step 13. Go to step 12.
Go to step 13. The problem is
solved.
Go to step 15. Go to step 14.
Go to step 15. The problem is
solved.
Contact the next The problem is
level of support. solved.
4064