Staple Finisher Ejector Assembly Removal - Lexmark M52 Series Service Manual

10
Disconnect the cable (D), and remove the chute assembly.
Staple finisher ejector assembly removal
1
Remove the staple finisher left cover. See
2
Remove the staple finisher right cover. See
3
Remove the staple finisher diverter plunger assembly. See
removal" on page 604.
4
Remove the staple finisher drive gear assembly. See
page 604.
5
Remove the staple finisher feed roll. See
6
Remove the staple finisher chute assembly. See
"Staple finisher left cover removal" on page
"Staple finisher right cover removal" on page
"Staple finisher diverter plunger assembly
"Staple finisher drive gear assembly removal" on
"Staple finisher entrance roller removal" on page
"Staple finisher chute assembly removal" on page
Parts removal
637
D
584.
4064
586.
632.
634.