Sensor (Fuser Exit) Late-Leaving Jam Service Check - Lexmark M52 Series Service Manual

Action
Step 5
Perform a print test.
Does the problem remain?

Sensor (fuser exit) late-leaving jam service check

Action
Step 1
Check the rear door for damage. Make sure that the rear door
properly closes.
Is the rear door functional and free of damage?
Step 2
Replace the rear door. See
Does the problem remain?
Step 3
Check the fuser for damage and life expiration.
Is the fuser damaged or has it reached end of life?
Step 4
Replace the fuser. See
Does the problem remain?
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Sensor tests
b
Find the sensor (Fuser exit).
Does the sensor status change while toggling the sensor?
Step 6
a
Remove the right cover. See
page 420.
b
Check the cable J60 on the controller board for proper
connection.
Is the cable properly connected?
Step 7
Reseat the cable, and then perform a print test.
Does the problem remain?
"Rear door removal" on page
"Fuser removal" on page
"Right cover removal" on
Diagnostics and troubleshooting
Yes
Contact the next
level of support.
Yes
Go to step 3.
Go to step 3.
449.
Go to step 4.
Go to step 5.
452.
Go to step 9.
Go to step 8.
Go to step 8.
99
4064
No
The problem is
solved.
No
Go to step 2.
The problem is
solved.
Go to step 5.
The problem is
solved.
Go to step 6.
Go to step 7.
The problem is
solved.