Sensor (Hcoe Pass-Through) Removal - Lexmark M52 Series Service Manual

9
Release the bin from the right and left frames, and then remove it.
Sensor (HCOE pass‑through) removal
1
Remove the HCOE left cover. See
2
Remove the HCOE right cover. See
3
Remove the HCOE bin pinion. See
4
Remove the HCOE bin shaft. See
5
Remove the HCOE bin. See
6
Disconnect the sensor cable J3 from the controller board.
"HCOE left cover removal" on page
"HCOE right cover removal" on page
"HCOE bin pinion removal" on page
"HCOE bin shaft removal" on page
"HCOE bin removal" on page
Parts removal
578
550.
549.
558.
574.
575.
4064