Staple Finisher Entrance Roller Removal - Lexmark M52 Series Service Manual

Staple finisher entrance roller removal
Note: This part is not a FRU.
1
Remove the staple finisher left cover. See
2
Remove the staple finisher right cover. See
3
Remove the staple finisher diverter plunger assembly. See
removal" on page 604.
4
Remove the staple finisher drive gear assembly. See
page 604.
5
Remove the two E-clips (A).
Warning—Potential Damage: Be careful not to lose the E-clips and spacers.
"Staple finisher left cover removal" on page
"Staple finisher right cover removal" on page
"Staple finisher drive gear assembly removal" on
A
Parts removal
632
"Staple finisher diverter plunger assembly
4064
584.
586.