Tamper Drive Belt Removal - Lexmark M52 Series Service Manual

4
Disconnect the cable (A), and then remove the two screws (B).
5
Remove the motor.

Tamper drive belt removal

1
Remove the staple finisher left cover. See
2
Remove the staple finisher right cover. See
3
Remove the staple finisher top cover. See
4
Release the motor engaged to the belt. See
or "Motor (staple finisher left tamper) removal" on page
"Staple finisher left cover removal" on page
"Staple finisher right cover removal" on page
"Staple finisher top cover removal" on page
"Motor (staple finisher right tamper) removal" on page 619
619.
Parts removal
620
4064
584.
586.
588.