Fuser Temperature Error Service Check - Lexmark M52 Series Service Manual

Action
Step 2
Reseat or replace the cables.
Does the problem remain?
Step 3
Restart the printer.
Does the problem remain?
Step 4
Replace the motor (main). See
page 410.
Does the problem remain?
Step 5
Restart the printer.
Does the problem remain?

Fuser temperature error service check

Action
Step 1
Check the fuser for proper installation.
Is the fuser properly installed?
Step 2
Reinstall the fuser.
Does the problem remain?
Step 3
Check if the fuser is a genuine and supported Lexmark unit.
Is the fuser a genuine and supported Lexmark unit?
Step 4
Check if the fuser type is compatible with the specific model of the
printer.
Are the fuser and printer compatible?
Step 5
Check the fuser life.
Is the fuser still within its rated or recommended life?
"Main motor drive removal" on
Diagnostics and troubleshooting
307
Yes No
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.
Go to step 5. The problem is
solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 4. Go to step 6.
Go to step 5. Go to step 6.
Go to step 7. Go to step 6.
4064