Parameter Summary; Parameters List By Group - Delta Electronics ASDA-A Series User Manual

Call 1(800)985-6929 for Sales
Chapter 7 Servo Parameters|ASDA-A&A+ Series
7.2 Parameters Summary

7.2.1 Parameters List by Group

Group 0: P0-xx
Parameter
P0-00★
P0-01★
P0-02
P0-03
P0-04
P0-05
P0-06
P0-07
P0-08
P0-09
P0-10
P0-11
P0-12
P0-13
P0-14
P0-15
P0-16
P0-17
Explanation of symbols (marked after parameter)
(★) Read-only register.
(▲) Parameter cannot be set when Servo On (when the servo drive is enabled).
(●) Parameter is effective only after the servo drive is restarted (after switching power off and on).
(■) Parameter setting values are not retained when power is off.
7-2
Call 1(800)985-6929 for Sales
Name
VER Firmware Version
ALE Drive Fault Code
STS Drive Status
MON Analog Monitor Output
CM1 Status Monitor 1
CM2 Status Monitor 2
CM3 Status Monitor 3
CM4 Status Monitor 4
CM5 Status Monitor 5
MAP0 Block Data Read / Write Register 0
MAP1 Block Data Read / Write Register 1
MAP2 Block Data Read / Write Register 2
MAP3 Block Data Read / Write Register 3
MAP4 Block Data Read / Write Register 4
MAP5 Block Data Read / Write Register 5
MAP6 Block Data Read / Write Register 6
MAP7 Block Data Read / Write Register 7
SVSTS Servo Output Status Display
deltaacdrives.com
Monitor Parameters
Function
deltaacdrives.com
sales@deltaacdrives.com
Control Mode
Default Unit
Pt Pr S
Factory
N/A
setting
N/A N/A
00 N/A
01 N/A
0 N/A
0 N/A
0 N/A
0 N/A
0 N/A
407H N/A
10FH N/A
110H N/A
224H N/A
111H N/A
112H N/A
225H N/A
109H N/A
N/A N/A
Revision April 2009
sales@deltaacdrives.com
T