Structure Of Position Control Mode - Delta Electronics ASDA-A Series User Manual

Call 1(800)985-6929 for Sales
CTRG : the instant time when the contact changes from 0 (open) to 1 (closed).
The application of absolute and incremental position control is various and multiple. This kind of position
control is equal to a simple sequence control. Users can easily complete the cycle running by using the
above table. For example, the position command, P1 is 10 turns and P2 is 20 turns. Give the position
command P1 first and then give the position command P2. The difference between absolute and
incremental position control is shown as the figure below:
Absolute Type

6.2.3 Structure of Position Control Mode

Basic Structure:
In order to pursue the goal of perfection in position control, the pulse signal should be modified through
position command processing and the structure is shown as the figure below:
ASDA-A Series:
Revision April 2009
Call 1(800)985-6929 for Sales
deltaacdrives.com
Chapter 6 Control Modes of Operation|ASDA-A&A+ Series
20 turns
10 turns
deltaacdrives.com
Incremental Type
10 turns
sales@deltaacdrives.com
20 turns
6-5
sales@deltaacdrives.com