Using This Manual - Delta Electronics ASDA-A Series User Manual

Call 1(800)985-6929 for Sales
Thank you very much for purchasing DELTA's AC servo products.
This manual will be helpful in the installation, wiring, inspection, and operation of Delta AC servo drive and
motor. Before using the product, please read this user manual to ensure correct use.
You should thoroughly understand all safety precautions (DANGERS, WARNINGS and STOPS) before
proceeding with the installation, wiring and operation. If you do not understand please contact your local
Delta sales representative. Place this user manual in a safe location for future reference.

Using This Manual

Contents of this manual
This manual is a user guide that provides the information on how to install, operate and maintain
ASDA-A and ASDA-A+ series AC servo drives, and ASMT and ECMA series AC servo motors. The
contents of this manual are including the following topics:
Who should use this manual
This user manual is intended for the following users:
Important precautions
Before using the product, please read this user manual thoroughly to ensure correct use and store
this manual in a safe and handy place for quick reference whenever necessary. Besides, please
observe the following precautions:
Revision April 2009
Call 1(800)985-6929 for Sales
Installation of AC servo drives and motors
Configuration and wiring
Trial run steps
Control functions and adjusting methods of AC servo drives
Parameter settings
Communication protocol
Inspection and maintenance
Troubleshooting
Application examples
Those who are responsible for designing.
Those who are responsible for installing or wiring.
Those who are responsible for operating or programming.
Those who are responsible for maintaining or troubleshooting.
Do not use the product in a potentially explosive environment.
Install the product in a clean and dry location free from corrosive and inflammable gases
or liquids.
Do not connect a commercial power supply to the U, V, W terminals of motor. Failure to
observe this precaution will damage either the Servo motor or drive.
deltaacdrives.com
deltaacdrives.com
sales@deltaacdrives.com
Preface
i
sales@deltaacdrives.com