Table of Contents
Advertisement
2)
Plug the Tube Joint to the Ink tube.
Make sure Tube Joint set in firmly.
3)
Attach the O Ring to the Tube Joint.
Be careful not to strech the O Ring.
4)
By using Plug Tube, push O-Ring until it reaches
the end of Adapter Screw.
Do not connect the Tube witn Damper at this
stage. Otherwise, ink cannot be filled.
Fix the Guide Plates and the Cable Guides.
25
Fix the Cable Guide at the end of Cable Veyor.
Fix 3 pcs of Guide Plate side-by-side from the end of the
Cable Veyor. After these three, fix Guide Plate
alternately.
Tube Joint
3-37
Tube Joint
Tube Joint
O ring
Plug Tube
O Ring
Guide Plate
Cable Guide
<Front View>
Advertisement
Table of Contents
