Flushing Position Adjustment
Information
Necessary tools
General tools
None
Special tools
1000005829
TOOL,VINYL YE UV RESISTANT ST-113
Typical work time
Contents of work
Flushing position
adjustment
Cover That Needs to Be Removed
Workflow
C AUTION
• This is to adjust the flushing position. This adjustment is NOT required when a cap top and a print head are removed or
replaced. This adjustment is required after performing the limit position & maximum scan width position initialize. Without
this adjustment, the flushing may not be performed properly and that can cause nozzle firing problem.
• To prevent hardened ink from entering into the nozzle, refresh print head before the adjustment. Perform medium cleaning
on all print heads if 20 minutes passes.
FUNCTION
CLEANING
MEDIUM CL.
Time
5 min.
FUNCTION
CLEANING
MEDIUM CL.
AB
2-38
Right panel cover
2
L EF 2-300