Table of Contents
Advertisement
Turn on the Printer Main Power SW and then turn on the
26
sub power while pressing the Left, Right and Down keys
to enter the Service Mode.
Select [SERVICE MENU] > [SUB MENU] > [REPLACE
27
TUBE] > [FINALIZE] and press [ENTER] key.
The Operation for after Tube replacement will start.
Capping the Head, rotating the Pressure Pumps about
30 seconds and filling the ink in the Sub Tank to the
position near the Head. After filling the ink, the Pressure
Pump stop with the Close state.
When [CONNECT TUBE TO HEAD] displayed on LCD,
28
connect the Ink Tubes to the Ink Dampers.
After connecting the tubes, press [ENTER] key.
29
Operation for after Tube replacement will start again.
The Pressure Pump rotates to fill the ink to the
SubTank.The Pressure Pump keeps rotating about 1
minute to fill ink in whole Ink Tube. Then, it stops with
opened. After that, it performs normal cleaning
automatically.
When [REPLACE TUBE PREPARE] is displayed on
LCD, the operation is completed.
[
], [
MENU
SERVICE MENU
SERVICE MENU
SUB MENU
Ink Tube
Ink Damper
REPLACE TUBE
PREPARE
3-38
], [
] + POWER ON
[MENU] key
SUB MENU
REPLACE TUBE
[
REPLACE HEAD
FINALIZE
[ENTER]
NOW PROCESSING...
CONNECT TUBE
TO HEAD
]
Advertisement
Table of Contents
