Table of Contents
Advertisement
Make sure to put the Tube in the Hole.
Check that Cap Top snaps back by pressing the resin
12
part of the Cap Top lightly at its front and rear. Do not
touch the sponge part.
If the Cap Top doesn't snaps, check that the springs are
fixed correctly and the tube is put in the Hole.
Fix the Plate.
13
Move the Head Carriage manually to the position where
14
the left Frame of the Head Carriage is aligned to the left
Frame of the Cap Unit when seen from the front view.
3-16
Cap Top Assy
Hole
Plate
Left Frame
of Head Carriage
Left Frame
of Cap Unit
Advertisement
Table of Contents
