Loosen Adapter Screw and remove Ink Tube with Tube Joint
6
Adapter from the damper.
Do not remove Tube Joint Adapter from Ink Tube.
Connect the syringe to Ink Tube. Tehn, tighten up Adapter
7
Screw.
Be careful not to have the ink spilled on Heads.
If the ink is spilled on Head, it causes the short
circuit on Main Board, Head Board and Print
Carriage Board.
Select [I/S MENU] > [I/S CONTROL] > [PRESS PUMP 1- 6] >
8
[OPEN] and press [ENTER] key.
Pull out the ink by the syringe.
9
Adapter Screw
SERVICE MENU
I/S MENU
5-29
Adapter Screw
I/S MENU
I/S CONTROL
[
I/S CONTROL
PRESS PUMP1
[
PRESS PUMP1
OPEN
[ENTER]
] [
]
] [
]