Roland Advanced Jet AJ-1000 Service Notes page 121

Lift up the Carriage Board, then put the each Ink Tube
21
through the Wire Saddle at 2 places.
Fix the Carriage Board by 6 screws.
22
Connect the Flexible Cables to the Carriage Board and
23
fix the Protective Plate with the Nylon Rivets.
Connect the Adapter Screw, the Joint Tube and the O
24
Ring to the end of the each Ink Tube.
1) Pass the Ink Tube through the Adapter Screw.
Wire Saddle
Nylon Rivet Protective Plate
Ink Tube
3-36
Carriage Board
<Rear view>
Flexible Cable
Adapter Screw