Table of Contents
Advertisement
- When the lines of the replaced Head are shifted to the
rear compared to M lines, turn the Adjustment Screw CW.
- When the lines of the replaced Head areshifted to the
front compared to M lines, turn the Adjustment Screw
CCW.
Tighten up the 2 screws fixing Head in the reverse order.
15
shown in the figure
Print Test Pattern again.
16
If the result is NG, repeat 12 - 16 .
The shifting of lines should be within 1/2 dot.
2
1
4-24
Advertisement
Table of Contents
