Table of Contents
Advertisement
Key Combination
Service Menu
Service Menu Item
Service Mode
Upgrade F/W
Installing F/W
System Parameter
Initialize
Head Height/Limit/
Max Scan Width
ADJUSTMENT
History Report
Service
(REPORT)
Service Report
Head Up/Down
Users Menu
Users Menu Item
Language/Unit
Combination Key Selection
Main Power
ENTER
REPORT
Menu
Test
Print
Combination Key Selection
Menu
Sub Power
Sub Power
Main Power
ENTER
Sub Power
Sub Power
Select [HISTORY REPORT]
Sub Power
Sub Power
Sub Power
4-16
Comments
Press [Menu] and [
] to enter
Service Menu.
[Are you sure?] will be displayed.
Press [ENTER] to upgrade F/W.
Use this when the main board is
replaced.
[SUM-ERROR] will be displayed
by turning on the Main Power.
Press [ENTER] to upgrade F/W.
All parameters will be initialized.
Press [ENTER] to start Initialize.
[HEAD HEIGHT]
[LIMIT POSITION]
[MAX. SCAN ADJUSTMENT]
can be done by rotation in this item.
Select [HISTORY REPORT] and
press [
].
Then, select Head and press
[ENTER] to print History Report.
Service Report (Adjustment value)
will be printed.
Press [
], head unit move up.
Press [
], head unit move down.
Impossible to operate others in this
item.
Comments
Press [
] / [
] to select
Language.
Advertisement
Table of Contents
