Preparation For Transportation - Roland Advanced Jet AJ-1000 Service Notes

7-4 Preparation for Transportation 2

This is the procedure of the preparation when transporting the machine with the cleaning liquid filled in
it.
If the power can not be turned on again within 48 hours, take this procedure for the preparation. Make
sure to keep the ambient temperature during the transportation between 5 and 40
If the ambient temperature can be kept 30
hours without turning on the power even if it is transported without removing the ink.
Perform the HEAD WASH.
1
1) Turn on the SUB POWER SW while pressing the
Left, Right and Down keys to enter the SERVICE
MODE.
Select [SERVICE MENU] > [SUB MENU] > [HEAD
and press the [ENTER] key.
WASH]
2) Empty the DRAIN BOTTLE after "EMPTY DRAIN
BOTTLE" is displayed on the LCD.
3) Press the [ENTER] key.
The ink in the Sub tanks is delivered back to the Ink
cartridges. (It takes about 70 sec.)
o
C or below, the machine can be kept safe up to about 72
7-24
o
C.
SERVICE MENU
SUB MENU
[ ]
[
SUB MENU
HEAD WASH
[ ]
HEAD WASH
123456
[ENTER]
EMPTY
DRAIN BOTTLE
WASHING HEAD..
>>
]