Table of Contents
Advertisement
[VERTICAL ADJUSTMENT]
Select [PRINT MENU] > [HEAD ADJUST] > [VERTICAL] >
11
[TEST PRINT] and press [ENTER] key.
Test Pattern shown in the right figure will be printed.
12
By pressing Down key, the media is fed out so that you can
see the
Test Pattern. By pressing Up key, the media is fed
back to the printing position.
Test Pattern will be changed if another head is set
to Standard Head.
Loosen the 2 screws fixing Head in order shown in the
13
figure.
Loosen the screws fixing the Head for 1/2 turn.
If the screws are loosened too much,
adjustments could not be performed correctly.
Turn Adjustment Screw so that the lines of each color in the
14
test pattern will be aligned straight to Magenta Head.
*Reference*
Position of the printing moves 1/2 line by turning
the screw 30 degrees.
Magenta is set to Standard Head by default.
1
2
Adjustment Screw
4-23
SERVICE MENU
PRINT MENU
[
]
PRINT MENU
HEAD ADJUST
[
]
HEAD ADJUST
VERTICAL
[
]
VERTICAL
TEST PRINT
Advertisement
Table of Contents
