Table of Contents
Advertisement
3) Attach the emptied bottle and press the [ENTER] key.
Press the [ENTER] key again to reset the drained
liquid count.
Switch the position of the roll shaft of the Take-up unit
4
and the one of the Feed unit.
This is for protecting the paper pipe from
interference during the transportation.
Remove the 6 ink cartridges.
5
Clean the surrounding of the hole of the cartridge, and
tape the holes.
Do not store or transport the
cartridge vertically.
There is no need to remove the maintenance
liquid cartridge.
RESET DRAIN
MAINTENANCE
DRAIN BOTTLE
Roll shaft of Take-up unit
Roll shaft of Feed unit
Tape
7-20
COUNTER
[ ENTER ]
Ink cartridge
Advertisement
Table of Contents
