Table of Contents
Advertisement
Operation
Explain following items in reference to the User's Manual.
Switching the power on and off
This machine has five power switches.
When you finish printing, you turn off
switches 3 and 4 as required.
!! IMPORTANT !!
- Make sure to use the Sub power switch of the printer for the daily powering on and off. If the Main power
switch of the printer is off, the automatic cleaning will not operate and it will cause the heads to be
broken.
(The automatic cleaning will operate even if the sleep mode is disabled as long as the Sub power switch
is on.)
- When printing is not being performed, remove the loaded media or switch off the Sub power of the
printer. The continued application of heat at a single location may cause the release of toxic gases from
the media or pose a fire hazard.
- If the power switches for the media take-up and feed systems are kept on, the take-up and feed systems
may operate by moving the dancer roller.
Raise the pinch rollers when printing is not being performed. If you keep them set down for a long time, they will
be deformed.
Settings of the Media Heating System
-Operation of the Preheater, Print heater and Dryer (drying heater and blower fan)
-Making the temperature setting
-General guide for the preset temperatures
!! IMPORTANT !!
- The platen and dryer become hot. Exercise caution to avoid fire or burns.
- Remove any loaded media or switch off the sub power when printing is not being performed.
- Never use media that cannot withstand the heat of the media heating system.
- Never use the platen or dryer for any purpose for which they are not intended, such as to dry clothing.
Starting printing
Pausing or canceling printing
Shifting the print-start position to the desired position
Back side of the machine
2
Main power switch
1
Main power switch
for the dryer
for the printer
7-11
Sub power switch
3
for the printer
4
Power switches for
the media take-up
and feed systems
Advertisement
Table of Contents
