Table of Contents
Advertisement
[BIAS ADJUSTMENT]
Select [PRINT MENU] > [HEAD ADJUST] > [BIAS] > [TEST
5
PRINT] and press [ENTER] key.
Test Pattern shown in the right figure will be printed.
6
By pressing Down key, the media is fed out so that you
can see the
Test Pattern. By pressing Up key, the
media is fed back to the printing position.
Loosen the 2 screws fixing Head in order shown in the
7
figure.
Loosen the screws fixing Head for 1/2 turn.
If the screws are loosened too much,
adjustments could not be performed correctly.
Turn Adjustment Screw by using 2.0mm Hexagonal
8
Wrench so that the lines of each color in the test pattern
will be aligned straight.
*Reference*
Position of the printing moves 1 line by turning the screw
1/4 turn.
SERVICE MENU
PRINT MENU
PRINT MENU
HEAD ADJUST
HEAD ADJUST
BIAS
BIAS
TEST PRINT
1
2
2
Adjustment
Screw
4-21
[
]
[
]
[
]
Advertisement
Table of Contents
