Roland Advanced Jet AJ-1000 Service Notes page 151

I/S CONTROL
I/S MENU
HEAD UP/DOWN
I/S CONTROL
I/S CONTROL
WIPER
I/S CONTROL
SLIDER
I/S CONTROL
PRESS PUMP1
Choose PRESS PUMP1 to 6
I/S CONTROL
SUPPLY PUMP1
Choose SUPPLY PUMP1 to 6
I/S CONTROL
M-LIQUID PUMP
HEAD UP/DOWN
OPEN
HEAD UP/DOWN
CLOSE
WIPER
TOP
WIPER
UP
WIPER
DOWN
WIPER
SLOPE
SLIDER
FRONT
SLIDER
REAR
Pressure Pump can be rotated in [PRESSURE] or [REVERSE]
PRESS PUMP1
direction.
Pressure Pump can stop with [OPEN] or [CLOSE] by choosing
CLOSE
its status while the pump is rotating.
[ * ] is displayed when the pump is rotating.
PRESS PUMP1
OPEN
PRESS PUMP1
PRESS
PRESS PUMP1
REVERSE
Supply Pump can be rotated in [SUPPLY] or [REVERSE]
SUPPLY PUMP1 direction. Pressure Pump can stop with [OPEN] or [CLOSE] by
choosing its status while the pump is rotating.
OPEN
[ * ] is displayed when the pump is rotating.
If the sensor of Sub Tank is [ON] when the pump starts rotating,
it will stop rotating with the message below.
If the sensor of Sub Tank becomes [ON] while the pump is rotating,
SUPPLY PUMP1
it will stop rotating and turn into [CLOSE] with the message below.
CLOSE
SUPPLY PUMP1
SUPPLY
SUPPLY PUMP1
REVERSE
M-LIQUID PUMP
OPEN
M-LIQUID PUMP1
CLOSE
M-LIQUID PUMP1
SUPPLY
M-LIQUID PUMP1
REVERSE
4-4
PRESS *
OPEN
PRESS
CLOSE
REVERSE *
OPEN
REVERSE
CLOSE
CANCELED
BY INK FULL
SUPPLY *
CLOSE
SUPPLY
OPEN
REVERSE *
CLOSE
REVERSE
OPEN
Maintenance Liquid Pump can be rotated in [SUPPLY] or
[REVERSE] direction.
Pressure Pump can stop with [OPEN] or [CLOSE] by
choosing its status while the pump is rotating.
SUPPLY
CLOSE
SUPPLY
OPEN
REVERSE
CLOSE
REVERSE
OPEN