Table of Contents
Advertisement
Select [MOTOR MENU] > [AGING] > [SCAN] and press
11
[ENTER] key.
By tightening Upper Adjustment Screw, the pully is tiltes
12
leftward. And, belt moves down.
By tightening Lower Adjustment Screw, the pully is tiltes
rightward. And the belt movesd up.
By this way, adjust the belt position on the left side of the
machine.
When the adjustment is completed, tighten up the 2 screws
13
shown in the figure on Pulley Stand.
SERVICE MENU
MOTOR MENU
MOTOR MENU
AGING
AGING
SCAN
<Front View>
Adjustment Screw
<Front View>
Lower Adjustment Screw
<Front View>
4-48
[
]
[
]
[ENTER]
Advertisement
Table of Contents
