Adjust Fold Position (Finisher Adjustment) - Xerox 770 Digital Color Press System Administration Manual

System Settings > Common Service Settings
• Use the up/down arrow buttons to make the desired selections.
• As you click the up/down arrow buttons, the illustration moves indicating the direction
that the image will move or increase/decrease on the paper.
NOTE
The factory default setting for all the Alignment options is zero.
The following adjustments can be made to the position of the output image:
• Perpendicularity: Use this when the image is straight on the page, but the corners
are slanted, not at right (90 degree) angles to each other. This feature adjusts the
image digitally on the drum so that it will align with the paper for both side 1 and
side 2.
• Skew: Use this when the entire image on the page is slanted and not straight. This
feature adjusts the paper so that the image for side 1 and/or side 2 are not skewed
but aligned with each other.
• Magnification: Use this feature to correct for image stretch from side 1 to side 2. The
image may be enlarged or reduced as necessary.
NOTE
When making adjustments to multiple items, perform the adjustments in the
following order: Perpendicularity, Skew, X/Y% (width/length) Magnification, and
finally X/Y Print Positions.
Adjust Fold Position (Finisher
Adjustment)
NOTE
The Adjust Fold Position (Finisher Adjustment) is available only when the
Standard/Booklet Maker Finisher is connected to the machine. If the finisher is
equipped with the optional C/Z Folder, additional fold position options become
available with the Adjust Fold Position feature.
2-46 ®
Xerox 770 Digital Color Press
System Administration Guide