Access The Media Server; Check Software Version - Avaya S8500 Manual

4
Select <OK> and press Enter to partition the hard drive and reformat the partitions
Once the drive is properly configured, the program begins the installation process and reports the
progress.
These processes can take up to 20 minutes. When the media server is ready to reboot, the CD-
ROM drive drawer opens. You must remove the CD from the drive at this time.
The reboot may take up to 3 minutes. The telnet session drops automatically.

Access the media server

1
Click Start > Run to open the Run dialog box.
2
Type
telnet 192.11.13.6
login prompt.
3
Exit the Telnet session.
4
Log onto the Maintenance Web Interface. See
here.

Check software version

1
Under Server, click Software Version.
2
Verify the software version.
Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Migrating from an S8500 Media Server to S8710 Media Server
and press Enter to see if you get a login prompt. Repeat until you get the
Access the media server
On first S8710 Media Server
on page 123 and return
127
2