Default Setting Mode - SATO SG112-ex Operator's Manual

4.2.12 Default Setting Mode

The product can be reset to the default setting as in the factory preset.
CAUTION
It is generally not necessary to perform the initialization. Doing so will remove all the customer settings.
Note
Refer to Section 8.1 List of Initial Values
The flowchart shows the sequence of the setting screens for the default setting mode. The table
describes each setting screen in detail.
DEFAULT MODE
Select the item to be initialized.
• PRINTER SETTING: Initialize the settings of the product.
• ALT. PROTOCOL: Initialize the protocol code.
for the details of the initial value of each setting items.
Press CANCEL button
+ Switch Power to On " I "
CANCEL or
FUNCTION button
Select PRINTER SETTING
+ ENTER button
Select NO + Select YES +
ENTER button
ENTER button
Waiting to be powered off.
4 Operation and Configuration
* Press the , , or button to
select an item or set the value
accordingly. The active arrow icons
are shown on the screen.
Select ALT.PROTOCOL
+ ENTER button
SG112-ex Operator Manual
133