SATO SG112-ex Operator's Manual page 46

3 Loading the Ribbon and Media
5
While pressing the ribbon set on the right,
align the concave part of the ribbon with
the convex part of the left ribbon supply
holder and set.
6
Align the recess of an empty ribbon core  to the convex part of the right ribbon
rewind holder , and then insert the core onto the ribbon rewind holder.
7
While pressing the empty ribbon core set
on the right, align the concave part of the
ribbon core with the convex part of the left
ribbon rewind holder and set.
44
SG112-ex Operator Manual
7
6