SATO SG112-ex Operator's Manual page 83

IGNORE CAN/DLE
Ignore or acknowledge the CAN/DLE code of the received data.
• YES: Ignore the CAN/DLE code.
• NO: Do not ignore the CAN/DLE code.
Note
Shows only if the DATA PORT is selected and PROTOCOL is set to
STATUS4.
SNTP FUNCTION
Enable or disable the SNTP function.
• ENABLE: Perform the time correction of the calendar.
• DISABLE: Do not perform the time correction of the calendar.
Note
Shows only if the real-time clock (calendar) kit is installed and the LAN
interface is selected.
IPv4/6 select
Select IP address type of SNTP.
• IPv4
• IPv6
Note
Shows only if the SNTP function is enabled.
NTP IPv4 ADDRESS
Set the IPv4 address for NTP server.
The setting range is from 0.0.0.0 to 255.255.255.255.
Note
Shows only if the SNTP function is enabled.
4 Operation and Configuration
SG112-ex Operator Manual
81