SATO SG112-ex Operator's Manual page 45

2
Pull the head release lever  forward to
unlock the print head.
3
Lift up the print head assembly  to the
maximum.
4
Align the ribbon  with the ribbon supply holder  on the right side of the product,
and then insert the core onto the ribbon supply holder.
4
Note
• Make sure the wind direction of the ribbon roll is according to the routing path sticker pasted on the product.
• Make sure that the ink side of the ribbon is facing down when passing it below the print head.
3 Loading the Ribbon and Media
2
3
5
SG112-ex Operator Manual
43