SATO SG112-ex Operator's Manual page 96

4 Operation and Configuration
DHCP SETTING
Enable or disable DHCP.
• ENABLE: Enable DHCP.
• DISABLE: Disable DHCP.
Note
• Shows only if the LAN interface is selected.
• The setting will be effective only if you power on the product again.
RARP SETTING
Enable or disable RARP.
• ENABLE: Enable RARP.
• DISABLE: Disable RARP.
Note
• Shows only if the LAN interface is selected.
• The setting will be effective only if you power on the product again.
IPv4 ADDRESS
Set the IPv4 address.
The setting range is from 0.0.0.0 to 255.255.255.255.
The default value is 192.168.001.001.
Note
• Shows only if the LAN interface is selected.
• The setting will be effective only if you power on the product again.
IPv4 SUBNET MASK
Set the IPv4 subnet mask address.
The setting range is from 0.0.0.0 to 255.255.255.255.
The default value is 255.255.255.000.
Note
• Shows only if the LAN interface is selected.
• The setting will be effective only if you power on the product again.
94
SG112-ex Operator Manual