SATO SG112-ex Operator's Manual page 122

4 Operation and Configuration
HEAD CHECK MODE
Set the method for the head check.
• ALL: Perform the head check for every item.
• CHECK PAGE: Perform the head check for each specified number of
media.
• START-END: The head check occurs before starting to print and when
printing is stopped. If backfeed is applicable, the head check occurs
before starting to print, when stopping to print and during the backfeed.
Note
Shows only if the head check function is enabled.
HEAD CHECK PAGE NO.
Specify the number of media between each head check.
The setting range is from 000001 to 999999.
Note
Shows only if HEAD CHECK MODE is set to CHECK PAGE.
EXTERNAL SIGNAL
Enable or disable the external signal (EXT) function.
If the external signal (EXT) function is enabled, data can be sent and
received using an appropriate device plugged into the EXT connector.
• ENABLE: Enable the external signal (EXT) function.
• DISABLE: Disable the external signal (EXT) function.
120
SG112-ex Operator Manual