SATO SG112-ex Operator's Manual page 126

4 Operation and Configuration
PROTOCOL CODE
Set the protocol code.
• STANDARD: Use a standard code.
• NON-STANDARD: Use a non-standard code.
Note
To set the non-standard code, send the user download command <LD> in
normal mode. For more details on the <LD> command, refer to the
Programming Reference.
LCD POWER SAVING
Specify a period of time to light off the LCD backlight when the product is
not operated.
The setting range is from 00 to 15 minutes.
Note
This function is disabled if set to 00; the LCD backlight will remain on. For
details, refer to Section 5.3 LCD Power Saving
ERROR INDICATION
Set the LCD backlight for indicating an error.
• NONE: No change to the LCD backlight.
• ON: The LCD backlight lights orange.
• BLINKS: The LCD backlight flashes orange.
124
SG112-ex Operator Manual
Mode.