SATO SG112-ex Operator's Manual page 75

CHANGE ROLLER
Set the notification interval (in printed distance) about when the platen
roller needs to be replaced.
The setting range is from 000 to 999 km.
Note
The notification function will be disabled if the distance is set to 0.
CHANGE HEAD
Set the notification interval (in printed distance) about when the print head
needs to be replaced.
The setting range is from 000 to 999 km.
Note
The notification function will be disabled if the distance is set to 0.
CHANGE CUTTER
Set the notification interval (in number of cuts) about when the cutter unit
needs to be replaced.
The setting range is from 000000 to 990000 cuts.
Note
The notification function will be disabled if the distance is set to 0.
SETTING FINISH?
Confirm to complete the setting.
• YES: Returns to the user mode screen.
• NO: Returns to the NOTICE FUNCTION screen to select an item.
4 Operation and Configuration
SG112-ex Operator Manual
73