SATO SG112-ex Operator's Manual page 121

CHECK MEDIA SIZE
Enable or disable the function to check media size.
• ENABLE: The function to check media size is on.
• DISABLE: The function to check media size is off.
Note
Shows only if PITCH SENSOR is set to ENABLE.
COMMAND ERROR
Enable or disable the command error indication.
This setting determines the product motion when detecting a command
error.
• ENABLE: Stops printing when a command error occurs.
• DISABLE: Shows a warning icon and continues printing when a
command error occurs.
HEAD CHECK
This product can be set to check the print head when printing each media.
• ENABLE: Enable the head check function.
• DISABLE: Disable the head check function.
HEAD CHECK
Automatically check if there is a filament disconnection of the print head.
• NORMAL: Check the entire print area.
• BARCODE: Check only the area for printing a barcode. Head check is
not applicable for barcodes printed as graphic data.
CAUTION
Head check is a reference for checking for a filament disconnection of the
print head. This function does not guarantee barcode readability.
Note
Shows only if HEAD CHECK is set to ENABLE.
4 Operation and Configuration
SG112-ex Operator Manual
119