Turning On The Power; Power Setting - SATO CT400i Series Quick Manual

Turning On the Power

Plug the AC adapter/power cord into the printer and turn on the power.

[Power Setting]

When installation is
1
completed, set the power as
shown below.
2 Connect the power cord to
the AC adapter.
The plug of the included
power cord is a 3-pronged
plug.
3-prong type outlets use one
of the prongs as a ground.
When the outlet is a 3-prong
type, plug the power cord
directly into it.
Connect the printer → AC
3
adapter → power cord.
When plugging the power
cord into the printer's power
connector, make sure the
power cord connector is
oriented properly. When
plugging in the power cord
to the printer, use one hand
to hold the printer while
using the other hand to plug
in the cord.
4
Plug the included AC
adapter into the print and the
power cord into the outlet.
When the power outlet is the
2-prong type, use the
included 2-pronged adapter
to plug the power cord into
the power outlet.
Be sure to connect the ground
wire to a ground. Not connecting
the ground wire could result in
Caution
electrical shock.
26
The power cord set included
with this printer is only for use
with this printer. Do not use it
Caution
with other electrical products.