Continuous Mode, Pitch Sensor Enabled And Pulse Input; (Head Check Disabled) - SATO SG112-ex Operator's Manual

8.7.3 Continuous Mode, Pitch Sensor Enabled and Pulse Input (Head
Check Disabled)
(1) Operation
Standby
Print the 1st label
Print the 2nd label
(Note)
(2) Timing chart
Label feed
Head check (TYPE1,2)
Head check (TYPE3,4)
External signal PRIN
PREND (TYPE1)
PREND (TYPE2)
PREND (TYPE3)
PREND (TYPE4)
PRIN signal input
PRIN signal input
(1)
The positions shown above are the base reference point when using the Gap sensor.
Page Break
Print 1st label
Print head Pitch sensor (Gap)
(1)
(1) (2)
(2) (3)
Print 2nd label
8 Appendix
(2) (3)
(3) (4)
(4)
SG112-ex Operator Manual
205