2
Open the top cover .
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
3
Pull the head release lever forward to
unlock the print head.
4
Lift up the print head assembly to the
maximum.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
5
Remove the media, carbon ribbon and
make the print head visible.
2
3
SG112-ex Operator Manual
6 Maintenance
1
161