SATO SG112-ex Operator's Manual page 74

4 Operation and Configuration
NOTIFICATION FUNCTION SETTING
Select whether or not to set the notification function.
• YES: Set the notification function.
• NO: Do not set the notification function. The screen returns to user
mode.
Note
For details on the media motion when the set notification interval has
reached, refer to Section 8.4 Notification
NOTICE FUNCTION (SELECT)
Select the items for notification.
• CLEAN PRINTER: Notify when to the product needs to be cleaned.
• CHANGE ROLLER: Notify when the platen roller needs to be replaced.
• CHANGE HEAD: Notify when the print head needs to be replaced.
• CHANGE CUTTER: Notify when the cutter unit needs to be replaced.
NOTICE FUNCTION (ENABLE/DISABLE)
Enable or disable the notification for the item selected in the above
NOTICE FUNCTION.
• ENABLE: Enable the notification function.
• DISABLE: Disable the notification function.
CLEAN PRINTER
Set the notification interval (in printed distance) about when the product
needs to be cleaned.
The setting range is from 000 to 999 m.
Note
The notification function will be disabled if the distance is set to 0.
72
SG112-ex Operator Manual
Function.