SATO SG112-ex Operator's Manual page 81

PRESS ENTER KEY
This screen reminds the user to press the ENTER button to change or
power off the product to save the updated setting.
INTERFACE SETTING
Set whether or not to perform the interface settings.
• YES: Enter the PORT SELECT screen.
• NO: Enter the IGNORE CR/LF screen.
PORT SELECT
Select the port used for the connected interface.
• DATA PORT: For receiving various SBPL commands and executing
print operations.
• SUB PORT: For monitoring the printer status and connecting to
external devices.
DATA PORT
Select the connected interface for use with the data port.
The options are as follows:
• USB
• LAN
• RS-232C
• IEEE1284
Note
• You cannot select the interface that has already been set for the SUB
PORT.
• The setting will be effective only if you power on the product again.
4 Operation and Configuration
SG112-ex Operator Manual
79