SATO SG112-ex Operator's Manual page 47

8
From the ribbon supply holder, thread the
ribbon under the print head and through
the ribbon rewind holder.
Refer to the routing path sticker pasted on the
product.
9
Wind the ribbon around the empty ribbon
core  on the ribbon rewind holder.
Attach the free end of the ribbon to the
ribbon core with adhesive tape .
10
Turn the ribbon rewind holder in the
direction of the arrow for several rounds, to
wind the ribbon.
11
Close the print head assembly . Press
on both sides as shown by the arrow to
close it tightly until it clicks.
12
Close the top cover.
CAUTION
When closing the top cover, be careful not to pinch
your fingers.
3 Loading the Ribbon and Media
6
3
SG112-ex Operator Manual
8
45