6 Maintenance
6
Clean the dirt on the print head using
a cotton swab/cloth dabbed with cleaning
liquid.
7
Clean the dirt on the platen roller
using a cotton swab/cloth dabbed with
cleaning liquid.
Rotate the roller to clean the entire roller.
8
Clean the dirt on the media sensor
window using a cotton swab/cloth
dabbed with cleaning liquid.
9
Lift up and remove the media lid that
is covering the feed roller.
10
Dab the cleaning liquid on the cotton swab/
cloth, and wipe off the dirt from the feed
roller and the upper nip roller .
162
SG112-ex Operator Manual
4
5
6
7
9
8