Setting The Alarm Activation Level; Saving Translations - Avaya S8400 Installing & Configuring

Hide thumbs Also See for S8400:

Table of Contents

Chapter 5: IP interface translations

2. In the Host field, enter the IP address for the SIPI that is listed in the Location field.

add ipserver-interface 8

Ignore Connectivity in Server Arbitration? n

Primary IPSI

------------

Location:

DHCP ID: ipsi-A01a

3. Set the IP Control field to y.

4. Verify that all the other fields are populated and submit the form to save the changes.

5. Repeat this procedure for each port network.

Setting the alarm activation level

1. At the SAT, type change system-parameters maintenance and press Enter.

2. In the CPE Alarm Activation Level field, enter none, warning, minor, or major,

according to the customer request.

3. Submit the screen to save the changes.

To save the translations to the hard disk drive, at the SAT, type save translation and press

Enter.

Installing and Configuring the Avaya S8400 Server

IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8

1A01

Host: 172.22.22.174

IP Control? y

Socket Encryption? n

Enable QoS? n

QoS Parameters

--------------

Call Control 802.1p: 6

Call Control DiffServ: 46

January 2008

Table of Contents